Problem mit ispCP Installation

Dieses Thema im Forum "Hosting & Server" wurde erstellt von bigD, 18. Mai 2009 .

Schlagworte:
Status des Themas:
Es sind keine weiteren Antworten möglich.
  1. 18. Mai 2009
    Hallo,

    ich hab ein Problem mit der FTP Installation von ispCP.
    Ich mach in meinem Terminalfenster folgende eingabe und das folgt dann daraus:

    Code:
    xx-xx-xx-xx:~# /etc/init.d/proftpd start
    Starting ftp server: proftpd - warning: unable to determine IP address of 'xx-xx-xx-xx'
     - error: no valid servers configured
     - Fatal: error processing configuration file '/etc/proftpd/proftpd.conf'
    [COLOR="Red"] failed![/COLOR]
    
    Ich hab auch schon direkt in ispCP Forum geschrieben aber da brauchen die ewigkeiten bis mal ein Post kommt der mir auch nicht hiilft... Und da das hier um einiges schneller geht hab ich mir gedacht fragste mal hier nach^^

    BW is ehrensache!

    Danke
    bigD
     
  2. 18. Mai 2009
    AW: Problem mit ispCP Installation

    cat /var/log/proftpd/error.log was sagt der , bitte mehr infos


    was steht denn in der /etc/hostname ?

    und in der /etc/hosts `????
    da darf nur ein hostnamen drinstehen.
     
  3. 18. Mai 2009
    AW: Problem mit ispCP Installation

    in der hosts steht folgendes:

    Code:
    127.0.0.1 adresse.de.local localhost
    xx.xx.xx.xxx adresse.de name
    ::ffff:xx.xx.xx.xxx adresse.de name
    ::1 ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    ff02::3 ip6-allhosts
    
    und die hostname enthält folgendes:

    Code:
    xx-xx-xx-xxx
    die error.log gibts nich bei mir...
     
  4. 18. Mai 2009
    AW: Problem mit ispCP Installation

    steht da xx-xxx-xxxx-xxxxxxxx oder steht da eine ip? falls nicht, ändere dieses xx.xx.xxx in einen hostname, der gültig ist und auf den server zeigt ( rdns )
     
  5. 18. Mai 2009
    AW: Problem mit ispCP Installation

    Strange...nach nem reboot gehts auf einmal wieder...

    Allerdings wenn ich jetzt verbinden will kommt erst: Connected to Server und dann wird wieder diconnected...
     
  6. 18. Mai 2009
    AW: Problem mit ispCP Installation

    sagmal bist du zu unfähig irgendwelche serverlogs zu posten, wenn du nicht weisst, wo diese zum jeweiligen programm sind, kündige dein server
     
  7. Video Script

    Videos zum Themenbereich

    * gefundene Videos auf YouTube, anhand der Überschrift.