proftpd kann nicht fxpn

Decryptor · 24. Februar 2010

hoi ich habn kleines Problem ud zwar kann ich nix fxpn

[R] TYPE I
[R] 200 Type set to I
[L] TYPE I
[L] 200 Type set to I
[R] PROT C
[R] 200 Protection level set to C
[R] PASV
[R] 227 Entering Passive Mode ( 83,164,246)
[L] PORT ****,164,246
[L] 200 PORT command successful
[L] STOR 555.rar
[L] 150 Opening BINARY mode data connection for 555.rar
[R] RETR 555.rar
[L] 425 Unable to build data connection: Operation not permitted
[R] 150 Connection accepted
[L] ABOR
[R] 426 Connection closed; transfer aborted.
[L] 226 Abort successful
[L] Übertragung fehlgeschlagen!
[L] TYPE A
[L] 200 Type set to A
[L] PASV
[L] 227 Entering Passive Mode (****,199,148).
[L] Öffne Datenkanal-IP: **** PORT: 51092
[L] LIST -al
[L] Verbunden. SSL Session aushandeln..
[L] 150 Opening ASCII mode data connection for file list
[L] SSL Aushandlung erfolgreich...
[L] SSL verschlüsselte Sitzung mit Cipher DHE-RSA-AES256-SHA (256 bits)
[L] 226 Transfer complete.
[L] Verzeichnis geladen: 183 Bytes in 0,20 Sekunde(n) (0,9 KB/s)
[R] TYPE A
[R] 200 Type set to A
[R] PROT P
[R] 200 Protection level set to P
[R] PASV
[R] 227 Entering Passive Mode (****,164,247)
[R] Öffne Datenkanal-IP: **** PORT: 42231
[R] MLSD
[R] Verbunden. SSL Session aushandeln..
[R] 150 Connection accepted
[R] SSL Aushandlung erfolgreich...
[R] SSL verschlüsselte Sitzung mit Cipher AES256-SHA (256 bits)
[R] 226 Transfer OK
[R] Verzeichnis geladen: 114 Bytes in 0,22 Sekunde(n) (0,5 KB/s)
Übertragung von Warteschlange komplett
1 Datei(en) nicht übertragen

Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

meine Config

#
# /etc/proftpd/proftpd.conf -- This is a basic ProFTPD configuration file.
# To really apply changes reload proftpd after modifications.
#

# Includes DSO modules
Include /etc/proftpd/modules.conf

# Set off to disable IPv6 support which is annoying on IPv4 only boxes.
UseIPv6 off

ServerName "Come to the dark side"
ServerType standalone
DeferWelcome off

MultilineRFC2228 on
DefaultServer on
ShowSymlinks on

TimeoutNoTransfer 600
TimeoutStalled 600
TimeoutIdle 1200

DisplayLogin welcome.msg
DisplayFirstChdir .message
ListOptions "-l"

DenyFilter \*.*/
AllowForeignAddress on

# Port 21 is the standard FTP port.
Port 2000

# In some cases you have to specify passive ports range to by-pass
# firewall limitations. Ephemeral ports can be used for that, but
# feel free to use a more narrow range.
# PassivePorts 49152 65534

# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd)
MaxInstances 30

# Set the user and group that the server normally runs at.
User proftpd
Group ftpuser

UseReverseDNS off
IdentLookups off
DelayEngine off

# Umask 022 is a good standard umask to prevent new files and dirs
# (second parm) from being group and world writable.
Umask 022 022
# Normally, we want files to be overwriteable.
AllowOverwrite on

# Uncomment this if you are using NIS or LDAP to retrieve passwords:
# PersistentPasswd off

# Be warned: use of this directive impacts CPU average load!
#
# Uncomment this if you like to see progress and transfer rate with ftpwho
# in downloads. That is not needed for uploads rates.
# UseSendFile off

TransferLog /var/log/proftpd/xferlog
SystemLog /var/log/proftpd/proftpd.log

<IfModule mod_tls.c>
TLSEngine on
TLSLog /var/log/proftpd/tls.log
TLSProtocol SSLv23
TLSOptions NoCertRequest
TLSRSACertificateFile /etc/proftpd/ssl/proftpd.cert.pem
TLSRSACertificateKeyFile /etc/proftpd/ssl/proftpd.key.pem
TLSVerifyClient off
TLSRequired on
</IfModule>

<IfModule mod_quota.c>
QuotaEngine on
</IfModule>

<IfModule mod_ratio.c>
Ratios on
</IfModule>

# Delay engine reduces impact of the so-called Timing Attack described in
# Početna stranica
# It is on by default.
<IfModule mod_delay.c>
DelayEngine on
</IfModule>

<IfModule mod_ctrls.c>
ControlsEngine on
ControlsMaxClients 2
ControlsLog /var/log/proftpd/controls.log
ControlsInterval 5
ControlsSocket /var/run/proftpd/proftpd.sock

</IfModule>

<IfModule mod_ctrls_admin.c>
AdminControlsEngine on
</IfModule>

Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Anzeige

pyro · 24. Februar 2010

AW: proftpd kann nicht fxpn

Code:

[L] 425 Unable to build data connection: Operation not permitted

Du hast anscheinend keine Schreibrechte in dem Verzeichnis. Zugriffsrechte alle angepasst?

Decryptor · 24. Februar 2010

AW: proftpd kann nicht fxpn

uploaded geht ja von meinem pc,

croatia · 24. Februar 2010

AW: proftpd kann nicht fxpn

Kann der Host von dem du aus was wegflashen willst auch fxp???

Decryptor · 24. Februar 2010

AW: proftpd kann nicht fxpn

yo kanner, habs mit 2 servern versucht

croatia · 24. Februar 2010

AW: proftpd kann nicht fxpn

versuch mal ohne SSL/TLS zu flashen das sollte gehen.
anscheinend hat proftpd probleme mit SSL/TLS zu flashen (was ich so mal gelesen habe, selbst habe ich immer andre ftps bevorzugt).

Crack02 · 24. Februar 2010

AW: proftpd kann nicht fxpn

proftpd kann kein ssl fxp. dafür musst drftpd oder glftpd nehmen.

Nützliche Suchen

proftpd kann nicht fxpn

Videos zum Themenbereich