USB laufwerk mouten

Dieses Thema im Forum "Linux & BSD" wurde erstellt von poeffy, 23. Januar 2007 .

Schlagworte:
  1. Diese Seite verwendet Cookies. Wenn du dich weiterhin auf dieser Seite aufhältst, akzeptierst du unseren Einsatz von Cookies. Weitere Informationen
  1. #1 23. Januar 2007
    hi
    ich hab schon viel versucht aber irgendwie will es ned klappen.... wie kann ich mein usb cdrom laufwerk mounten??? dmesg gab dies aus:
    dmesg
    Code:
    APIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 20000000 (gap: 1e000000:e0c00000)
    Detected 1797.312 MHz processor.
    Built 1 zonelists. Total pages: 122832
    Kernel command line: root=/dev/hda8 ro
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 479568k/491328k available (1500k kernel code, 11104k reserved, 602k data, 256k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3597.23 BogoMIPS (lpj=7194477)
    Security Framework v1.0.0 initialized
    SELinux: Disabled at boot.
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
    Compat vDSO mapped to ffffe000.
    CPU: AMD Athlon(tm) XP 2200+ stepping 01
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20060707
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    checking if image is initramfs... it is
    Freeing initrd memory: 4244k freed
    NET: Registered protocol family 16
    EISA bus registered
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: nForce2 C1 Halt Disconnect fixup
    Boot video device is 0000:02:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 16) *11
    ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *11
    ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *7
    ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5
    ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *11
    ACPI: PCI Interrupt Link [LAPU] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *11
    ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LKSM] (IRQs 23) *10
    ACPI: PCI Interrupt Link [LFWR] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LETH] (IRQs 20 21 22) *0, disabled.
    ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 14 devices
    PnPBIOS: Disabled by ACPI PNP
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    pnp: 00:0a: ioport range 0x480-0x487 has been reserved
    pnp: 00:0a: ioport range 0xd00-0xd07 has been reserved
    PCI: Bridge: 0000:00:08.0
     IO window: disabled.
     MEM window: disabled.
     PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
     IO window: disabled.
     MEM window: fbf00000-fe0fffff
     PREFETCH window: ebc00000-f3dfffff
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 4, 65536 bytes)
    TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
    TCP: Hash tables configured (established 16384 bind 8192)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    audit(1169566395.820:1): initialized
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    EISA: Probing bus 0 at eisa.0
    Cannot allocate resource for EISA slot 4
    EISA: Detected 0 cards.
    TCP bic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    Using IPI Shortcut mode
    ACPI: (supports S0 S1 S3 S4 S5)
    Freeing unused kernel memory: 256k freed
    Time: tsc clocksource has been installed.
    input: AT Translated Set 2 keyboard as /class/input/input0
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
    ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LKLN] -> GSI 22 (level, high) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
    ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 21 (level, high) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:02.2 to 64
    ehci_hcd 0000:00:02.2: EHCI Host Controller
    ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.2: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.2
    ehci_hcd 0000:00:02.2: irq 185, io mem 0xfeb00000
    ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 20 (level, high) -> IRQ 193
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 193, io mem 0xfe900000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 22 (level, high) -> IRQ 177
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ohci_hcd 0000:00:02.1: OHCI Host Controller
    ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:02.1: irq 177, io mem 0xfea00000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 3 ports detected
    NFORCE2: IDE controller at PCI slot 0000:00:09.0
    NFORCE2: chipset revision 162
    NFORCE2: not 100% native mode: will probe irqs later
    NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
    NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
     ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: Maxtor 6Y080L0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    SCSI subsystem initialized
    libata version 2.00 loaded.
    hda: max request size: 128KiB
    hda: 156250000 sectors (80000 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
    hda: cache flushes supported
     hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
    hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    Attempting manual resume
    ReiserFS: hda8: found reiserfs format "3.6" with standard journal
    ReiserFS: hda8: using ordered data mode
    ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda8: checking transaction log (hda8)
    ReiserFS: hda8: Using r5 hash to sort names
    input: PC Speaker as /class/input/input1
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected NVIDIA nForce2 chipset
    agpgart: AGP aperture is 64M @ 0xf4000000
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4300
    i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4340
    ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LAUI] -> GSI 21 (level, high) -> IRQ 185
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    input: ImExPS/2 Logitech Wheel Mouse as /class/input/input2
    ts: Compaq touchscreen protocol output
    intel8x0_measure_ac97_clock: measured 52647 usecs
    intel8x0: clocking to 48000
    Adding 995988k swap on /dev/hda6. Priority:-1 extents:1 across:995988k
    loop: loaded (max 8 devices)
    device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
    ReiserFS: hda7: found reiserfs format "3.6" with standard journal
    ReiserFS: hda7: using ordered data mode
    ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda7: checking transaction log (hda7)
    ReiserFS: hda7: Using r5 hash to sort names
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    fuse init (API version 7.7)
    hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
    hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
    ide: failed opcode was: unknown
    ATAPI device hdc:
     Error: Medium error -- (Sense key=0x03)
     (reserved error code) -- (asc=0x02, ascq=0x00)
     The failed "Read 10" packet command was:
     "28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 "
    end_request: I/O error, dev hdc, sector 64
    isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKE] -> GSI 16 (level, high) -> IRQ 201
    NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8776 Mon Oct 16 21:56:04 PDT 2006
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    IPv6 over IPv4 tunneling driver
    eth0: no IPv6 routers present
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    UDF-fs: No VRS found
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    hdc: media error (bad sector): status=0x51 { DriveReady SeekComplete Error }
    hdc: media error (bad sector): error=0x34 { AbortedCommand LastFailedSense=0x03 }
    ide: failed opcode was: unknown
    ATAPI device hdc:
     Error: Medium error -- (Sense key=0x03)
     (reserved error code) -- (asc=0x02, ascq=0x00)
     The failed "Read 10" packet command was:
     "28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 "
    end_request: I/O error, dev hdc, sector 64
    isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
    agpgart: Putting AGP V2 device at 0000:02:00.0 into 4x mode
    eth0: link down.
    eth0: link up.
    eth0: link down.
    eth0: link up.
    eth0: link down.
    eth0: link up.
    eth0: link down.
    eth0: link up.
    eth0: link down.
    eth0: link up.
    usb 1-1: new high speed USB device using ehci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    Initializing USB Mass Storage driver...
    scsi0 : SCSI emulation for USB Mass Storage devices
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
     Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.06
     Type: CD-ROM ANSI SCSI revision: 00
    usb-storage: device scan complete
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    usb 1-1: USB disconnect, address 2
    usb 1-6: new high speed USB device using ehci_hcd and address 3
    usb 1-6: configuration #1 chosen from 1 choice
    scsi1 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
     Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.06
     Type: CD-ROM ANSI SCSI revision: 00
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    usb-storage: device scan complete
    usb 1-6: reset high speed USB device using ehci_hcd and address 3
    usb 1-6: USB disconnect, address 3
    scsi 1:0:0:0: rejecting I/O to dead device
    scsi 1:0:0:0: rejecting I/O to dead device
    scsi 1:0:0:0: rejecting I/O to dead device
    scsi 1:0:0:0: rejecting I/O to dead device
    scsi 1:0:0:0: rejecting I/O to dead device
    usb 1-6: new high speed USB device using ehci_hcd and address 4
    usb 1-6: configuration #1 chosen from 1 choice
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 4
    usb-storage: waiting for device to settle before scanning
     Vendor: _NEC Model: DVD_RW ND-1300A Rev: 1.06
     Type: CD-ROM ANSI SCSI revision: 00
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    sr 2:0:0:0: Attached scsi CD-ROM sr0
    sr 2:0:0:0: Attached scsi generic sg0 type 5
    usb-storage: device scan complete
    
    das cd-rom laufwerk wird ja erkannt... aber wie kann ich des mounten? ich hab schon gedacht mit sda wegen usb aber des will irgendwie ned... mfg poeffy
     

  2. Anzeige
    Dealz: stark reduzierte Angebote finden.
  3. #2 24. Januar 2007
  4. #3 24. Januar 2007
    AW: USB laufwerk mouten

    bringt nur nix, weil die kernelmeldungen über die zuteilung der laufwerksbuchstaben fehlen. er hat zwar die gerätedaten ausgelesen aber wohl keinen passenden treiber gefunden, somit kann er kein block device zuordnen.
    distribution? kernel?
     
  5. #4 24. Januar 2007
    AW: USB laufwerk mouten

    debian etch testing ich glaub die 2.6.18 version.....
     
  6. #5 24. Januar 2007
    AW: USB laufwerk mouten

    sind in deinem
    Code:
    lsmod
    module wie

    scsi_mod
    usbcore
    usb-uhci
    uhci
    usb-ohci
    usb-storage

    geladen?
     
  7. #6 25. Januar 2007
    AW: USB laufwerk mouten

    Code:
    Module Size Used by
    sg 30364 0
    sr_mod 15908 1
    usb_storage 71360 1
    ipv6 213856 8
    nvidia 4545108 12
    fuse 38420 2
    button 6800 0
    ac 5252 0
    battery 9732 0
    autofs4 18436 0
    dm_snapshot 15516 0
    dm_mirror 18000 0
    dm_mod 48952 2 dm_snapshot,dm_mirror
    loop 14216 0
    tsdev 7616 0
    snd_intel8x0 29852 0
    snd_ac97_codec 82848 1 snd_intel8x0
    snd_ac97_bus 2432 1 snd_ac97_codec
    floppy 52004 0
    snd_pcm_oss 38048 0
    psmouse 34568 0
    serio_raw 6532 0
    snd_mixer_oss 15232 1 snd_pcm_oss
    snd_pcm 65928 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
    snd_timer 19972 1 snd_pcm
    snd 45412 6 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
    soundcore 8928 1 snd
    i2c_nforce2 6912 0
    snd_page_alloc 9736 2 snd_intel8x0,snd_pcm
    shpchp 32796 0
    pci_hotplug 28088 1 shpchp
    i2c_core 19472 2 nvidia,i2c_nforce2
    nvidia_agp 8092 1
    agpgart 29360 2 nvidia,nvidia_agp
    evdev 9088 0
    pcspkr 2816 0
    rtc 11572 0
    reiserfs 210432 2
    ide_cd 35616 0
    cdrom 32416 2 sr_mod,ide_cd
    ide_disk 14848 5
    sata_nv 10756 0
    libata 87572 1 sata_nv
    scsi_mod 121992 4 sg,sr_mod,usb_storage,libata
    generic 5124 0 [permanent]
    amd74xx 13084 0 [permanent]
    ide_core 107760 5 usb_storage,ide_cd,ide_disk,generic,amd74xx
    ehci_hcd 27144 0
    ohci_hcd 17540 0
    forcedeth 37252 0
    usbcore 109444 4 usb_storage,ehci_hcd,ohci_hcd
    thermal 13576 0
    processor 23724 1 thermal
    fan 4868 0
    
    das steht da drinnen aiso ja
     

  8. Videos zum Thema
Die Seite wird geladen...