#1 3. Juni 2008 Hallo@all Ich versuche nun schon seid stunden eine dvd zubrennen aber leider bricht der brenner immer am bevor er überhaupt angefangen hat kommt diese meldung starten von Disk at once fehgeschlagen Danach wirft er die dvd aus und das war es hier nochmal ein log Code: Windows XP 5.1 IA32 WinAspi: - NT-SPTI used Nero Version: 7.9.6.0 Internal Version: 7, 9, 6, 0 Recorder: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 Drive buffer : 2048kB Bus Type : default (0) -> ATAPI, detected: ? CD-ROM: <HL-DT-ST DVDRAM GSA-4160B>Version: A302 - HA 1 TA 0 - 7.9.6.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ExcelStor Technology J8080 atapi Port 0 ID 0 DMA: On CdRomPeripheral : HL-DT-ST DVDRAM GSA-4160B atapi Port 1 ID 0 DMA: On CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On === CDRom-Device-Map === HL-DT-ST DVDRAM GSA-4160B E: CdRom0 HL-DT-ST CD-RW GCE-8483B F: CdRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 1023MB (1048088kB) Free physical memory: 537MB (550084kB) Memory in use : 47 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 3.6.2008 DVD-Image brennen 00:56:30 #1 Text 0 File SCSIPTICommands.cpp, Line 424 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 00:56:30 #2 Text 0 File Burncd.cpp, Line 3508 Turn on Disc-At-Once, using DVD media 00:56:31 #3 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 2294911 (509:58.61, 4482MB) Last address to be written: 2294911 (509:58.61, 4482MB) 00:56:31 #4 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD DVD) 00:56:31 #5 Text 0 File DlgWaitCD.cpp, Line 2964 Recorder: HL-DT-ST DVDRAM GSA-4160B, Media type: DVD-R Disc Manufacturer: OPTODI - SCR008 Disc Application Code: 64, Disc Physical Code: 193 00:56:31 #6 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 00:56:31 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1) 2 indices, index0 (150) not provided original disc pos #0 + 2294912 (2294912) = #2294912/509:58.62 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2294912 blocks [E: HL-DT-ST DVDRAM GSA-4160B] -------------------------------------------------------------- 00:56:31 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995 Prepare [E: HL-DT-ST DVDRAM GSA-4160B] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 2 to 2: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4699979776, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 2 | 0 | 0x41 | 0 | 0 | 0x00 0 | 2 | 1 | 0x41 | 2294912 | 2294912 | 0x00 2294912 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 00:56:31 #9 Text 0 File SCSIPTICommands.cpp, Line 215 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 00:56:31 #10 Text 0 File Burncd.cpp, Line 4294 Caching options: cache CDRom or Network-Yes, small files-No (<64KB) 00:56:31 #11 Phase 24 File dlgbrnst.cpp, Line 1762 Caching of files started 00:56:31 #12 Text 0 File Burncd.cpp, Line 4413 Cache writing successful. 00:56:31 #13 Phase 25 File dlgbrnst.cpp, Line 1762 Caching of files completed 00:56:31 #14 Phase 36 File dlgbrnst.cpp, Line 1762 Burn process started at 8x (11.080 KB/s) 00:56:32 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 00:56:32 #16 Text 0 File DVDR.cpp, Line 3225 Recording mode: Sequential Recording Mode 00:56:32 #17 Text 0 File DVDR.cpp, Line 3381 Start write address at LBA 0 DVD high compatibility mode: Yes 00:56:32 #18 Text 0 File Cdrdrv.cpp, Line 9872 ---- Disc Structure: Physical Format Information (00h) ---- Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Revision number of maximum recording speed: 3.0 Revision number of minimum recording speed: - Revision number table of recording speed: 1.0 2.0 4.0 - - - - Class: 0 Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 30 00 10 20 40 00 00 - 00 00 00 21 00 00 00 00 .0...@.....!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00:56:32 #19 SPTI -1066 File SCSIPassThrough.cpp, Line 179 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066) Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Sense Code: 0x24 Sense Qual: 0x00 CDB Data: 0x53 00 00 00 00 00 23 04 80 00 00 00 Sense Area: 0x70 00 05 00 00 00 00 10 53 00 00 0C 24 00 00 C0 00 05 00:56:32 #20 CDR -1066 File ThreadedTransferInterface.cpp, Line 1752 Invalid field in command E: HL-DT-ST DVDRAM GSA-4160B 00:56:32 #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752 Could not perform start of Disc-at-once 00:56:32 #22 Text 0 File ThreadedTransfer.cpp, Line 269 Pipe memory size 83836800 00:56:32 #23 Phase 38 File dlgbrnst.cpp, Line 1762 Burn process failed at 8x (11.080 KB/s) 00:56:32 #24 Text 0 File SCSIPTICommands.cpp, Line 261 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 00:56:36 #25 Text 0 File Cdrdrv.cpp, Line 11185 DriveLocker: UnLockVolume completed 00:56:36 #26 Text 0 File SCSIPTICommands.cpp, Line 424 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL ich hab einfach keinen plan warum es nicht geht habe auch schon andere images versucht andere rollinge +/- alles das selbe cd gehn ohne probleme nur bei wii games macht er zicken egal wie ich es mache es geht einfach nicht Habe auch schon die nero versionen gewechselt von 8 auf 7 aber auch das hilft nicht!! ich hoffe hier weiß vileicht einer eine lösung wäre dankbar mfg + Multi-Zitat Zitieren
#2 3. Juni 2008 AW: DVD brennen nicht möglich Ich habe noch nie wii spiele gebrannt, aber versuch das programm mal! DVD Slideshow GUI - Download Damit habe ich früher meine dvds immer gebrannt und es hat nie iecken gemacht! + Multi-Zitat Zitieren
#3 3. Juni 2008 AW: DVD brennen nicht möglich kann man damit img datein brennen?? + Multi-Zitat Zitieren
#4 3. Juni 2008 AW: DVD brennen nicht möglich Also das einfachste Tool um Imagedateien auf DVD zu brennen is meiner Meinung nach ImgBurn. Damit hab ichbestimmt schon 20Wii-Games gebrannt und es gab nie Probleme. The Official ImgBurn Website + Multi-Zitat Zitieren
#5 3. Juni 2008 AW: DVD brennen nicht möglich Code: Sense Key: 0x05 (KEY_ILLEGAL_REQUEST) Welche Rohlinge verwendet? Auch Verbatim? Cee ya, CCS + Multi-Zitat Zitieren
#6 3. Juni 2008 AW: DVD brennen nicht möglich n key illegal request hat selten was mit den rohlingen zu tun gehabt Ich hasse diese ewige verbatim schreierei key illegal request heisst falsche kommunikation zwischen programm und brenner. ursachen: nero 7 auf Vista. ne alte firmware auf dem brenner. brenner gibt langsam auf. aspi treiber wollen nich. PIO statt DMA modus aktiviert. + Multi-Zitat Zitieren
#7 3. Juni 2008 AW: DVD brennen nicht möglich Wieso Vista? Fimrware-Update könnte nicht schaden Du fährst noch Version 302 (von 10/2004) Cee ya, CCS + Multi-Zitat Zitieren
#8 3. Juni 2008 AW: DVD brennen nicht möglich hab ursachen aufgezählt... bei vista zeigt nero 7 XP 6.0 an. + Multi-Zitat Zitieren
#9 3. Juni 2008 AW: DVD brennen nicht möglich Nicht nur Nero...Windows NT 6.0 = Vista...Windows NT 5.1 = XP Cee ya, CCS + Multi-Zitat Zitieren
#10 3. Juni 2008 AW: DVD brennen nicht möglich hab nix von NT 6.0 gesagt... nero zeigt in der log XP 6.0 und da merkt man, dass a) vista läuft und b) das nero 7 ist, welches nicht! fehlerfrei kompatibel ist zu vista. dass winV = nt 6.0 ist, ist ja eh klar. + Multi-Zitat Zitieren