Grims Ping remote Scan

poodle_1 · 3. Oktober 2005

Hi,

ich suche n tut wie man mit grims ping remote scannen kann kann,
hab da zwar eins gfunden aber irgendwie blick ich da nich so richtig durch, hat da jeamnd vllt noch n anderes tut oder so, oder kanns mir erklären, anscheinend bin ich zu dumm dafür

Anzeige

martin05 · 3. Oktober 2005

ich wüsste nicht, dass man mit grims ping remote scannen kann.
wenn du eh nur nach pubs scannst, dann kannste das auch local machen. :O

poodle_1 · 3. Oktober 2005

1) Upload all files.
============
I used Grimsping 1.7.3 for these purposes. I haven't checked if it is different
with newer versions.
First, install Grimsping on your own computer. Then you will see in the
install-folder ALMOST all files you need. Grimsping did put 2 other files on
your computer wich you need. Those are:
COMDLG32.OCX 138kb
MSCOMCTL.OCX 1042kb

These 2 files can probably be found in your /system32/ folder. Upload those 2
files also to the /system32/ folder of the b0x.
Furthermore, you will before we proceed edit your ping.ini file. Here you can
download the ping.ini file I use on hacks. It is important you at least edit
these 3 lines:
LogPath=c:\winnt\config\log\results.log
QueuePath=c:\winnt\config\log\queue.txt
LogPath=c:\winnt\config\log\perms.log

Okay, now provide a queue.txt file. Easiest is to open in grimsping and add some
ranges. You can also edit the file manually and you should know that grimsping
is accepting "wildcards" like 222.222.*.1-254.

2) Installing Grimsping as service.
===================
Now, you should have uploaded all files to a nice folder.
Easiest is to put all those files in a folder not too deep into the structure.
My choice would be c:\winnt\config\ because that is a almost empty folder, not
deep in the structure and who looks into that folder? We can now proceed with
installing grimsping as service, but it won't work until some changes are made
in his registry. You can find a example .reg file here (HYPERLINK HAS BEEN LOST).
Now, do this in commandline:
c:\winnt\config\instsrv.exe ping c:\winnt\config\srvany.exe
Note: the "ping" part is the service-name. You can choose whatever you like.

You now have succesfully created a service NAME, but you are not yet finished.
Now you should put the ping.reg into the registry (again, CHECK if you have
edited it correctly)
To put the ping.reg into the registry do this in commandline:
regedit /s ping.reg
Note: You should always check when putting things into the registry that there
isn't a "regedit.exe" in the process-list for a longer period. Check this with
pulist.exe or tlist.exe.

3) Starting the service.
================
Just type from the commandline:
net start ping
That should give you output whether your tftp server is installed succesfully as
service or not.

4) When the queue.txt is empty.
======================
Well, not really hard either, simply put more ranges in the queue.txt file and
then do from the commandline:
net stop ping <enter>
net start ping <enter>

its scanning again!

Klicke in dieses Feld, um es in vollständiger Größe anzuzeigen.

Bei nummer 2 blick ich nich so ganz

martin05 · 7. Oktober 2005

Was genau verstehst du da nicht? ?(
Kannste es nicht übersetzen oder was? :O
Laut Tutorial brauchst du dazu eh die *.reg (der Link ist ja nicht vorhanden=HYPERLINK HAS BEEN LOST)

Grims Ping remote Scan

Videos zum Thema

Ähnliche Themen mit den Stichworten: Grims Ping remote

Nützliche Suchen

Grims Ping remote Scan

Videos zum Thema

Ähnliche Themen mit den Stichworten: Grims Ping remote