#1 5. August 2007 enlightenment dr17 + cvs install hi ich hab ein problem... ich komme nämlich nicht mit dem install über cvs zu recht. ich möchte gerne den neuen enlightenment teste den man dort Enlightenment - Beauty at your fingertips bekommt. runterladen kann ich es aber wie ich installiere ich es? irgendwie versteh ich auch nicht wie cvs funktioniert.... :-( vll kann mir jemand eine kleine erklärung liefern wie ich es installieren kann. mfg poeffy + Multi-Zitat Zitieren
#2 5. August 2007 AW: enlightenment dr17 + cvs install ..erst bauen dann installieren http://wiki.enlightenment.org/index.php/E17_User_Guide/Installing_Using_CVS + Multi-Zitat Zitieren
#3 5. August 2007 AW: enlightenment dr17 + cvs install wenn ich versuche das edje paket zu installieren kommt nach dem ./autgen.sh folgende fehlermeldung und ich kann kein make durchführen: Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables EDJE_CFLAGS and EDJE_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. hab schon auf der man nachgeschaut aber find da ned wirklcih was, womit ich was anfangen kann.mfg poeffy + Multi-Zitat Zitieren
#4 5. August 2007 AW: enlightenment dr17 + cvs install locate pkgconfig liefert z.b. /usr/local/lib/pkgconfig oder /usr/lib/pkgconfig also PKG_CONFIG_PATH=/usr/local/lib/pkgconfig export PKG_CONFIG_PATH + Multi-Zitat Zitieren
#5 5. August 2007 AW: enlightenment dr17 + cvs install hi hab ich gemacht dann kommt: ****:/home/poeffy# locate pkgconfig locate: /var/cache/locate/locatedb: Datei oder Verzeichnis nicht gefunden und ich hab jetzt schon weiter konfiguriert. und jetzt kommt wenn ich enlightenment_start ausführe: Code: ESTART: 0.00000 [0.00000] - begin ESTART: 0.00048 [0.00047] - signals done ESTART: 0.00074 [0.00027] - determine prefix DYNAMIC DETERMINED PREFIX: /usr/local WARNING: Enlightenment could not determine its installed prefix and is falling back on the compiled in default: /usr/local You might like to try setting the following environment variables: E_PREFIX - points to the base prefix of install E_BIN_DIR - optional in addition to E_PREFIX to provide a more specific binary directory E_LIB_DIR - optional in addition to E_PREFIX to provide a more specific library dir E_DATA_DIR - optional in addition to E_PREFIX to provide a more specific location for shared data E_LOCALE_DIR - optional in addition to E_PREFIX to provide a more specific location for locale data ERROR: Enlightenment cannot determine its installed prefix from the system or argv[0]. This is because it is not on Linux AND has been Executed strangely. This is unusual. WARNING: Enlightenment could not determine its installed prefix and is falling back on the compiled in default: /usr/local You might like to try setting the following environment variables: E_PREFIX - points to the base prefix of install E_BIN_DIR - optional in addition to E_PREFIX to provide a more specific binary directory E_LIB_DIR - optional in addition to E_PREFIX to provide a more specific library dir E_DATA_DIR - optional in addition to E_PREFIX to provide a more specific location for shared data E_LOCALE_DIR - optional in addition to E_PREFIX to provide a more specific location for locale data ESTART: 0.00305 [0.00231] - prefix done ESTART: 0.00321 [0.00016] - intl init ESTART: 0.00337 [0.00016] - parse args ESTART: 0.00348 [0.00011] - arg parse done ESTART: 0.00359 [0.00011] - edje init ESTART: 0.00368 [0.00009] - ecore init ESTART: 0.00405 [0.00037] - ecore_file init ESTART: 0.00441 [0.00036] - more ecore ESTART: 0.00456 [0.00015] - x connect poeffy@homie:~$ enlightenment_start E - PID=11094, do_precache=1 ESTART: 0.00000 [0.00000] - begin ESTART: 0.00047 [0.00046] - signals done ESTART: 0.00084 [0.00037] - determine prefix DYNAMIC DETERMINED PREFIX: /usr/local WARNING: Enlightenment could not determine its installed prefix and is falling back on the compiled in default: /usr/local You might like to try setting the following environment variables: E_PREFIX - points to the base prefix of install E_BIN_DIR - optional in addition to E_PREFIX to provide a more specific binary directory E_LIB_DIR - optional in addition to E_PREFIX to provide a more specific library dir E_DATA_DIR - optional in addition to E_PREFIX to provide a more specific location for shared data E_LOCALE_DIR - optional in addition to E_PREFIX to provide a more specific location for locale data ERROR: Enlightenment cannot determine its installed prefix from the system or argv[0]. This is because it is not on Linux AND has been Executed strangely. This is unusual. WARNING: Enlightenment could not determine its installed prefix and is falling back on the compiled in default: /usr/local You might like to try setting the following environment variables: E_PREFIX - points to the base prefix of install E_BIN_DIR - optional in addition to E_PREFIX to provide a more specific binary directory E_LIB_DIR - optional in addition to E_PREFIX to provide a more specific library dir E_DATA_DIR - optional in addition to E_PREFIX to provide a more specific location for shared data E_LOCALE_DIR - optional in addition to E_PREFIX to provide a more specific location for locale data ESTART: 0.00313 [0.00230] - prefix done ESTART: 0.00330 [0.00017] - intl init ESTART: 0.00344 [0.00014] - parse args ESTART: 0.00355 [0.00010] - arg parse done ESTART: 0.00366 [0.00011] - edje init ESTART: 0.00374 [0.00009] - ecore init ESTART: 0.00412 [0.00038] - ecore_file init ESTART: 0.00313 [0.00230] - prefix done ESTART: 0.00330 [0.00017] - intl init ESTART: 0.00344 [0.00014] - parse args ESTART: 0.00355 [0.00010] - arg parse done ESTART: 0.00366 [0.00011] - edje init ESTART: 0.00374 [0.00009] - ecore init ESTART: 0.00412 [0.00038] - ecore_file init ESTART: 0.00437 [0.00025] - more ecore ESTART: 0.00451 [0.00014] - x connect ESTART: 0.01047 [0.00596] - ecore_con ESTART: 0.01089 [0.00042] - xinerama E17 INIT: XINERAMA CHOSEN: [0], 1280x1024+0+0 ESTART: 0.01134 [0.00045] - configure ESTART: 0.01154 [0.00020] - x hints ESTART: 0.01218 [0.00064] - x hints done ESTART: 0.01242 [0.00024] - efreet ESTART: 0.01277 [0.00034] - efreet done ESTART: 0.01288 [0.00012] - efreet paths ESTART: 0.01300 [0.00012] - efreet paths done ESTART: 0.01310 [0.00010] - ecore_evas init ESTART: 0.01366 [0.00056] - test file format support <<<< Enlightenment Error >>>> Enlightenment found Evas can't load PNG files. Check Evas has PNG loader support. der fehler unten versteh ich nicht.... mfg poeffy + Multi-Zitat Zitieren
#6 9. August 2007 AW: enlightenment dr17 + cvs install also ich gebs auf^^ ich bekomme es ned so gnaz zum laufen... jetzt würd ich aber gerne noch wissen wie kann ich alle files entfernen, die ich mir durch das configure make und install draufgespielt hab? mfg poeffy + Multi-Zitat Zitieren